Probably Stolen 3D Printer Chip (Ext. 10MM Mag.): Shopkeeper Item Entry
By the Probably Stolen Wiki editors
Updated · Patch: 1.0
3D Printer Chip (Ext. 10MM Mag.) is an item in Probably Stolen. This Probably Stolen 3d Printer Chip page covers its value, stats and where to get it. This entry covers the probably stolen 3d printer chip named 3D Printer Chip (Ext. 10MM Mag.) in Probably Stolen. It is a legal 1 × 1 grid chip with in-game id printer_chip_10_mag_ext, a base value of 400 credits, and a listed value of 400 cr in Production and modules. The chip contains the 3D printer blueprint, but owning it does not supply materials or power. Its name sets the print target: x1 Ext. 10MM Mag. The item was added in the 1.0 release on October 28, 2026, and the wiki lists it in the Modules and printer chips group. Use the items index for other entries and this page for the exact chip.
What the probably stolen 3d printer chip is
The 3D Printer Chip (Ext. 10MM Mag.) is a 3D Printer Chip (Ext. 10MM Mag.) with id printer_chip_10_mag_ext. The game page describes it as a chip that contains the 3D printer blueprint. Its name ties it to one Extended 10mm Magazine per batch, not to every printer job in the game. The item is legal, occupies 1 × 1 grid (1 cell), and has a documented base value of 400 credits. A production table also shows 400 cr. The inventory row says grid shape Not recorded 1x1. The page's article information lists game version 0.46D / Steam Build 26496118. These are the supported identity and stat details for this entry.
Documented stats for the probably stolen 3d printer chip
For this chip, the supported value is 400 credits, shown as 400 cr in the Production and modules list and as Base Value 400 in the items table. Base Value is a starting point, not a selling price. A tooltip can show both Est. Value and Base Value. Base Value is the item's own worth, while Est. Value starts from it and adds condition, market events, and markup. Haggling then moves the final price at the counter. Two copies of the same item can sell for different amounts, and the table gives Base Value only. The table was read from release build 26496118 and checked November 8, 2026. The page does not give an exact counter sale price for this chip.
Worth and buyer, answered directly: the base value is 400 credits, shown as 400 cr, and Merchant is the listed possible buyer among the customers who buy anything. Treat those 400 credits as a starting point rather than a fixed counter price, because condition, market events and markup move the final figure.
| Detail | Documented entry |
|---|---|
| In-game ID | printer_chip_10_mag_ext |
| Item group | Modules and printer chips |
| Inventory size | 1 × 1 grid (1 cells) |
| Base value | 400 credits / 400 cr |
| Legal status | Legal |
| Added | 1.0 release, October 28, 2026 |
| Game version | 0.46D / Steam Build 26496118 |
How to obtain the chip and who buys it
Where to get the probably stolen 3d printer chip: the listed possible acquisition is the Retired Gunsmith, who visits after you buy his upgrade from Wild's Network. When he comes weekly, there is a 20% chance he brings this item; he independently rolls 20% per visit and attempts to stock one copy on success, and stock placement requires counter space. The item is also brought in by customers. Can permits raise the stock chance? No — the documented sources do not list permits or any other factor as raising the 20% roll. The listed possible buyer is Merchant, who is among customers who buy anything and is matched by the item types each customer buys. No customer specifically looks for this kind of item.
What the chip prints at the 3D Printer
Insert the chip into the 3D Printer, add materials to the input tray, and leave space in the output tray. The documented batch prints 1 Extended 10mm Magazine per print from Scrap Metal ×3. The target progress is 60, about 3 nights at base speed. The printer needs the Metal Printing module, listed as Metal Printer Module in the batch recipe, installed. On cycles and power: with only the required modules, uninterrupted power, and no other modifiers, one batch takes 3 working cycles and 36 kJ. On quality: the item page gives no quality rules for this print, so quality is not documented here. The printer consumes the materials at the start and unlocks the reusable chip on completion. The chip is not used up: leave it in to keep printing. The chip does not supply materials or power.
Gun Part chips, batch size, and missing printer output
The probably stolen 3d printer chip is legal, so Security inspections ignore it and it can be kept in the Display Case. The name on a 3D Printer Chip sets the job: this one is x1 Ext. 10MM Mag., so it prints one Extended 10mm Magazine per batch. A chip's name gives its output and batch size, so each chip in the class prints only what its own name lists, and owning a chip never supplies the printer's materials or power.
Modules and recipe for Gun Parts: a Gun Parts chip carries the blueprint for the gun part named on it, so the module and recipe are the ones listed on that chip's own recipe. Match the chip's name to the exact Gun Part and batch size you want, then load the materials that recipe lists and install the special module it names. This chip is not a Gun Parts chip: the only job documented here is the Ext. 10MM Mag. recipe — Scrap Metal ×3 into 1 Extended 10mm Magazine, 60 progress, with the Metal Printing module installed (Metal Printer Module in the recipe). Use the Gun Part chip's own name and recipe rather than the Ext. 10MM Mag. entry.
Batch size comes from the chip name, not from a printer setting. The x1 on this chip means one item per print, so the mismatch points to the chip's named batch size rather than to a printer option. The chip itself is not used up: the printer consumes the materials at the start and unlocks the reusable chip on completion, so a chip that still reads as locked is waiting on that completion.
Why printed output vanished, and how to prevent it: the item page's only stated prevention is output tray space. Insert the chip, add the materials to the input tray, and leave space in the output tray before starting the batch. If output has gone missing, clear the output tray and try again — the page does not document any other cause or prevention.
Frequently asked questions
Is the probably stolen 3d printer chip contraband?
No. 3D Printer Chip (Ext. 10MM Mag.) is legal, so Security inspections ignore it and it can be kept in the Display Case.
Where can 3D Printer Chip (Ext. 10MM Mag.) be obtained?
The listed possible acquisition is Retired Gunsmith, who visits after you buy his upgrade from Wild's Network; he has a 20% weekly chance to bring one copy, stock placement needs counter space, and customers can bring it in.
Who buys 3D Printer Chip (Ext. 10MM Mag.)?
Merchant is the listed possible buyer; Merchant is among customers who buy anything and is matched by item types, and no customer specifically looks for this kind of item.
What does 3D Printer Chip (Ext. 10MM Mag.) do?
It is a 3D Printer recipe chip that contains the 3D printer blueprint; insert it into the 3D Printer to print 1 Extended 10mm Magazine per batch from Scrap Metal ×3.
What materials and module does one print need?
One documented print uses Scrap Metal ×3 and needs the Metal Printing module, listed as Metal Printer Module in the batch recipe, plus output tray space.
Does 3D Printer Chip (Ext. 10MM Mag.) get consumed?
No. The chip is not used up; leave it in the printer to keep printing, and the printer consumes the materials at the start.
How does the 3D printer run this job?
With only the required modules, uninterrupted power and no other modifiers, the probably stolen 3d printer chip's job takes 60 progress, about 3 nights at base speed, 3 working cycles and 36 kJ.